Menu

Racor Replacement Marine Snapp Fuel Filter with 30 Micron Element

SKU: RAC-R23298-30 MPN: R23298-30
cancel Out of Stock
£70.30 exc VAT

Prices exclude VAT. Trade pricing available on request.

info Quick Overview

Description

The Racor Snapp range is the new, alternative solution to engine fuel filtration. The one piece filter unit is designed to fit into the pipework while being mounted into a separate bracket. When it comes to changing the filter you simply snap the old filter out and replace with the new. Removal doesn’t require any tools and can even be done with one hand thanks to the two large tabs on the side of the filter. Due to the construction of the filter, no mess is created because there is no disassembly needed!

At a quick glance, the Racor Snapp looks similar in design to the quality spin on range, with the familiarity of a clear bowl for fuel inspection and the self-venting drain plug at the bottom of the filter. It also contains the trusted Racor Aquabloc filter media inside for optimum performance. However that is where the similarities end. The Snapp filter is housed in a glass filled nylon body which is rust and corrosion proof and requires the stainless steel mounting bracket for installation. The body of the filter also features large finger tabs to aid removal and insertion of the fuel filter. The Snapp filter is designed for use outside of the engine compartment so will meet Boat Safety Scheme requirements when installed properly.

The R23298-30 marine model Snapp filter is not supplied with the mounting bracket, this is available in the 23299 range. The filter contains a 30 micron element and is suitable for engines producing up to 140HP using diesel, bio-diesel (B20), petrol (gasoline) or bio-ethanol (E10). Racor marine Snapp filters are also available with 2 and 10 micron elements.

Racor Aquabloc elements are corrugated and pleated to create a large surface area of filter media, which slows fuel down to improve coalescing and filtration efficiency. It can also hold a large capacity of dirt to extend the life of the fuel filter, resulting in less money and time spent in replacing filters. The media results in a minimum of 99% water removal and 99% particle removal, which is critical to engine protection.

anchor

Out of stock

Get a Custom Quote

This item is currently out of stock. Send us your details and we will re-source availability, then get back to you with a custom quote as soon as possible.

Product: Racor Replacement Marine Snapp Fuel Filter with 30 Micron Element
SKU: RAC-R23298-30

Thank you. Once submitted, our team will review your request and contact you by email or phone as soon as possible.

lock Secure 256-bit Checkout
verified_user Official Marine Warranty
local_shipping Fast UK Delivery
support_agent Expert Marine Support
assignment_return 30-Day Returns

Description

The Racor Snapp range is the new, alternative solution to engine fuel filtration. The one piece filter unit is designed to fit into the pipework while being mounted into a separate bracket. When it comes to changing the filter you simply snap the old filter out and replace with the new. Removal doesn’t require any tools and can even be done with one hand thanks to the two large tabs on the side of the filter. Due to the construction of the filter, no mess is created because there is no disassembly needed!

At a quick glance, the Racor Snapp looks similar in design to the quality spin on range, with the familiarity of a clear bowl for fuel inspection and the self-venting drain plug at the bottom of the filter. It also contains the trusted Racor Aquabloc filter media inside for optimum performance. However that is where the similarities end. The Snapp filter is housed in a glass filled nylon body which is rust and corrosion proof and requires the stainless steel mounting bracket for installation. The body of the filter also features large finger tabs to aid removal and insertion of the fuel filter. The Snapp filter is designed for use outside of the engine compartment so will meet Boat Safety Scheme requirements when installed properly.

The R23298-30 marine model Snapp filter is not supplied with the mounting bracket, this is available in the 23299 range. The filter contains a 30 micron element and is suitable for engines producing up to 140HP using diesel, bio-diesel (B20), petrol (gasoline) or bio-ethanol (E10). Racor marine Snapp filters are also available with 2 and 10 micron elements.

Racor Aquabloc elements are corrugated and pleated to create a large surface area of filter media, which slows fuel down to improve coalescing and filtration efficiency. It can also hold a large capacity of dirt to extend the life of the fuel filter, resulting in less money and time spent in replacing filters. The media results in a minimum of 99% water removal and 99% particle removal, which is critical to engine protection.

Dimensions 104 × 97 × 198 cm
Capacity Description

Water: 100ml

Flow Rate Description

100 LPH (26 US GPH)

Style

Transparent Bowl

Element

30 Micron

Filter Configuration

Single

Integral Primer Pump

No

Maximum Horsepower Description

140HP

Maximum Pressure

3.5 Bar (50 PSI)

Brand

Racor

Series

Snapp Series

Application

Diesel & Petrol (Gasoline). Marine Applications. Snapp Filters: RAC-23299-02, RAC-23299-10 & RAC-23299-30.

Model

R23298-30

Height Description

198mm (7.8")

Width

97mm (3.8") at bracket

Depth

104mm (4.1")

Operating Temperature

From -29°C to +66°C (-20°F to +150°F)

Dimensions

Required Clearance for Service: 63.5mm (2-1/2")

Size

9.5mm (3/8") Ports, for use with Racor quick connect fittings