Description
The Mastervolt Mac Plus 24/48-15 is a DC-DC charger which is designed to provide quick and safe charge to the service battery, providing stabilised voltage to protect the battery and the equipment it powers.
Boost Your Service Battery – Too often, service batteries don’t get the charge they need. This is a problem made worse by smart alternators and start/stop systems, which result in slow and insufficient charges. The Mac Plus 48V and 36V solve that problem. With brand new bi-directional technology, the Mac Plus can use each side as an input or output, delivering a reliable and consistent charge to both service and starter batteries.
Proven Mastervolt Quality – The Mac Plus uses the proven Mastervolt 3-step+ charge algorithm, delivering a quick and easy charge, even to completely flat batteries. By knowing when the engine is running and providing charge, you can also be sure that the Mac Plus will never drain your starter battery.
A robust design holds up in even the harshest conditions, with battery temperature optimized charging and high-quality aluminium housing to ensure superior protection against dust and water ingress. The power efficient design also allows the Mac Plus to operate silently and without a fan.
Total Power Flexibility – With a wide DC input range, the Mac Plus allows all DC sources and can charge two batteries from a single alternator or charger. It supports a full range of chemistries and battery types, including lithium. And it also functions seamlessly with modern alternators such as Euro 5 and 6, ensuring proper charging by providing constant power, even when the alternator is inactive.
Parallel configuration of up to ten units will provide over 100 amperes. And advanced high-frequency technology with modern microprocessors ensures minimal power loss when switching from 36/48V to 12/24V and vice versa.
Analog voltage sense ports are also available to compensate for voltage drop and maintain proper charging.
Superior Monitoring & Control
Compatibility with CZone, NMEA 2000 and MasterBus delivers truly superior monitoring and control, and ensures Mac Plus integrates easily into complete systems. Achieve the best performance possible via various controllers and high quality MOSFETs. And configure the Mac Plus with ease via MasterAdjust, the CZone configuration tool, or even via the on-board DIP switches.
General Specifications:
Status indicator: Yes, 3 color double LED
Communication protocol: MasterBus, CZone & NMEA 2000
Output voltage: 30-60V DC
Nominal output voltage: 36/48V
Output voltage stabilisation: 2% at extremes of temps, load and input
Output voltage ripple (peak peak): Max. 1%
Max. output power: 900W
Max. output current: 15A
Nominal input voltage: 24V DC
Input voltage range: 16-32V
Max. input current: 50A
Galvanic isolation: No
Efficiency: > 95% (at nom. input voltage, full load); 97% peak
Parallel configuration: Yes, up to 4
Alarm contact: Yes, through MasterBus, CZone, DIP Switch or remote switch
Engine run signal input: Yes (active high/active low)
DIP switches: Yes, for basic set up
Technical specifications
Battery voltage sense: Yes
Battery types: Gel, AGM, Lithium Ion, user defined
Power consumption: < 5 mA, < 10 mA in CZone, < 1 mA in MasterBus
Temperature range (ambient temp.): -25°C to 60°C; derating > 40°C (104°F)
Cooling : Natural cooling
Protections: Overload, over-temperature, DC short circuit, reversed polarity (fuse)
Key Features
Bi-directional technology
Get either 48V or 36V power from a single unit
Fast & safe charging, even during short trips
Fanless design for silent operation
For flooded, Gel, AGM, Li-Ion & LiFePO4 batteries
Even charges fully depleted batteries
Engine run detection protects starter battery
Adjustable current limits to meet Euro 5/6 requirements
Voltage stabilisation protects sensitive equipment, lights & loads
Parallel operation to obtain charging capacities well over 100A
MasterBus, CZone & NMEA 2000 – intelligent system monitor & automation
Temperature compensation & voltage sense for optimal charging
E-Mark/R10 certification for mobile applications
Power supply mode offers stable power for sensitive loads
HD connections for easy installation & quick set up via DIP switches
