Description
The 2 litre Surejust tank can be used as an expansion tank or an accumulator tank.
An accumulator tank can be fitted after the pump on the cold feed line. This will help reduce rapid pump on/off cycling. Accumulators (used on the cold water side) are set at approximately 12-13psi as they need to be just below the cut in pressure of the pump.
Expansion tanks (used on the hot water side) need to be set above the maximum pressure of the pump but below the pressure of the pressure relief valve (PRV).
This 2 litre Supa Surejust accumulator tank comes complete with mounting brackets and connections for 15mm ID flexible plumbing. It is also possible to remove the 15mm hose tail to reveal a 1/2″ BSP male thread.
